DisclaimerSiteMapChineseEnglish

Pressure gauge

  • 1.jpg

Resistance remote pressure gauge

YTZ-150 resistance remote pressure gauge and YTZ-150B stainless steel resistance remote pressure ga
Description

YTZ-150 resistance remote pressure gauge and YTZ-150B stainless steel resistance remote pressure gauge are suitable for measuring the pressure of non-corrosive gases and liquids on copper and copper alloys or stainless steel alloys. The resistance remote transmission pressure gauge transmits the measured value to the secondary instrument far away from the measuring point through the positioner type sensor installed inside the instrument, so as to realize centralized detection and remote control. In addition, the resistance remote transmission pressure gauge can indicate the pressure on the spot at the same time, which is convenient for on-site process inspection.

The resistance remote pressure gauge can be connected with the diaphragm isolator (diaphragm body) to make the diaphragm type resistance remote pressure gauge, used to measure the corrosive, viscous, easy to crystallize media pressure.

Resistance remote pressure gauge main technical specifications

1. Basic error: plus or minus 1.6.

2. Measuring range: (Mpa)

(Special specifications, please indicate when ordering)

0-0.16 0-0.25 0-0.4 0-0.6

0.1 0-1.6 0-2.5 0-4

0-6, 0-10, 0-16, 0-25, 0-40

-0.1-0.06 -0.1-0.15 -0.1-0.3 -0.1-0.5

-0.1-0.9-0.1 -- 1.5-0.1 -- 2.4

3. Working conditions (1) Ambient temperature: -40-60℃

(2) Working pressure: static load:

Use up to 3/4 of the measured upper limit

Alternating load: up to 2/3 of the measured upper limit

Short-time pressure: up to the measured upper limit

(3) Relative temperature: < 85%

4. Technical data of slip wire resistance transmitter: Starting resistance: 3-20Ω

Full resistance: 340-400Ω

The applied voltage at the terminal is <6V

5, instrument diameter: Φ150mm

6. Connection size: M20X1.5


Message
Return To The Top