Right Angle sleeve joint
Description
Right Angle sleeve joint
Overview of sleeve joints
The sleeve joint is composed of three parts: the joint body, the sleeve and the nut. When the sleeve and nut sleeve are inserted into the joint body on the steel pipe and the nut is tightened, the outer front end of the sleeve is fitted with the conical surface of the joint body, and the inner edge bites into the seamless steel pipe evenly to form an effective seal.
The W end of the 24° cone is according to DIN 3861. The sleeve is double-edged.
Usually the surface of the joint body and nut is galvanized. The working pressure of the joint is up to 63MPa, and the outer diameter of the seamless steel pipe is 42mm.
Message
