TVVB- Elevator flat cable

Usage characteristics

1. Rated AC voltage: U0/U 0.6/1KV ** Operating temperature: 180℃ ** Ambient temperature: fixed laying -60℃ 2. The installation and laying temperature of flat cables should not be lower than -25℃.

3. Cable allowable bending radius: cable minimum for cable diameter 15 times flat cable structure characteristics

1. The conductive wire core adopts soft structure to ensure good soft performance of the cable.

2, insulation and protective layer material using butyl polymer, improve the cable soft characteristics and anticorrosion, cold resistance characteristics.

3, insulation core color separation, to provide convenience for installation

Structural characteristics of flat elevator cable

1. The conductive core is of soft structure to ensure good soft performance of the cable.

2. Butyl polymer is used as insulation and protective layer material to improve the cable's soft properties, corrosion resistance and cold resistance.

3. Insulation core color separation, for laying and installation to provide convenience.

4. Wire rope or other load bearing elements (TVVBG type) can be added on both sides of cable core as required by customers.

Product characteristics

Especially soft, especially resistant to bending, round trip movement, smooth no twist.

Indoor and outdoor, adapt to temperature, acid, alkali, oil and salt, can protect.

Main product

Elevator polyvinyl chloride insulated and sheathed flat flexible cable

Product model: TVVB (normal type)

TVVBG (Enhanced type - Wire Rope)

TVVBP (shielded type)

TVVBPG (Enhanced, Shielded type)

Main performance of cable (comply with Q/ZB01-2002)

The rated working voltage of the cable is AC 450/750V and below.

The ambient cable temperature ranges from -40 ° C to 70 ° C.

Cable * Small bending radius is 10 times the length of the small side of the cable.

There is no breakdown between the finished cable core under AC 50Hz and 2.5Kv test voltage for 5min.

Insulation and sheath minimum tensile strength 10N/mm2, minimum elongation at break 150%, -40℃ low-temperature winding without cracks, -40℃ low-temperature tensile maximum elongation 20%.

Our flat cable can be widely used in the elevator, lifting, transportation, machinery, electrical, steel, metallurgy, port, mining, logistics, warehousing and other industries of 450/750V and below various mobile power device power connection and control, signal, lighting, etc.

Packing, transportation and storage of cable:

Cables can be packed in coils or trays.

During cable transportation, ensure that the package is in good condition to prevent mechanical damage.

Long-term storage should avoid low temperature below -20℃ and high temperature above 50℃.