I. Overview:

The cable used in the converter is suitable for the rated AC voltage 0.6/1KV and below the frequency conversion control system as a power supply cable or electrical connection, the product has the voltage impact resistance, can withstand the pulse voltage of frequency conversion, the cable has good shielding, and eliminate electromagnetic interference, reduce the noise of the frequency conversion motor, the system runs stably. Used in metallurgy, electric power, petrochemical and other industries.

The cable of frequency converter is mainly used for the connection between the frequency conversion power supply and the frequency conversion motor, as well as the rated voltage of 1KV and below in the transmission and distribution lines, for the transmission of electricity. Especially applicable to papermaking, metallurgy, metal processing, mining, railway and food processing industries.

Ii. Conditions of Use:

1, rated voltage U0/U: 0.6/1KV.

2. The allowable high temperature of the conductor for a long time is 90 degrees, and the high temperature of short circuit is 250 degrees

3. The ambient temperature of installation and laying shall not be lower than 0 degrees, and the ambient temperature of fixed laying shall not be lower than -10 degrees.

High operating temperature:

Silicone rubber insulation 180℃

Fluorine 46 insulation 200℃ and 260℃ two kinds

PVC insulation 70℃

Crosslinked polyethylene 90℃

4, cable allowed small bending radius is not less than 15D(D- cable diameter,mm)

Iii. Product Performance:

1. The design adopts the fifth type of soft stranded copper conductor according to GB/T3956-1997.

2, crosslinked polyethylene insulation, good temperature and weather resistance.

3, low transmission impedance, good electromagnetic compatibility.

4. Low working capacitance

5, good anti-interference and low radiation performance.

6, symmetrical three-core cable structure design, has better transmission performance than four-core cable.

Iv. Model Name:

BPGGP silicon rubber insulated and sheathed copper wire braided shielding high temperature resistant frequency conversion power cable.

High temperature resistant frequency conversion power cable with silicone rubber insulation and sheathed copper tape wrapped shielding.

BPGGPP2 silicon rubber insulated and sheathed copper wire braided copper tape wrapped shielding high temperature resistant frequency conversion power cable.

Silicon rubber insulated and sheathed aluminum polyester composite film wrapped shielding high temperature resistant frequency conversion power cable.

BPGVFP silicon rubber insulated nitrile sheathed copper wire braided shielding high temperature variable frequency power cable.

BPGVFP2 silicon rubber insulated nitrile sheathed copper tape wrapped shield high temperature resistant frequency conversion power cable.

BPGVFPP2 silicone rubber insulated nitrile sheathed copper wire braided copper tape wrapped shielding high temperature variable frequency power cable.

BPGVFP3 silicone rubber insulated nitrile sheathed aluminum polyester composite film wrapped shield high temperature resistant frequency conversion power cable.

BPFFP Fluorine 46 insulated and sheathed copper braided shielding high temperature resistant frequency conversion power cable.

BPFFP2 Fluorine 46 insulated and sheathed copper tape wrapped shielding high temperature resistant frequency conversion power cable.

BPFFPP2 Fluorine 46 insulated and sheathed copper wire braided copper tape wrapped shielding high temperature resistant frequency conversion power cable

BPFFP3 Fluorine 46 insulated and sheathed aluminum polyester composite film wrapped shielding high temperature resistant frequency conversion power cable.

BPVVP polyvinyl chloride insulated and sheathed copper braided shielded frequency conversion power cable.

BPVVP2 polyvinyl chloride insulated and sheathed copper tape wrapped shielding frequency conversion power cable.

BPVVPP2 polyvinyl chloride insulated and sheathed copper wire braided copper tape wrapped shielding frequency conversion power cable.

BPVVP3 polyvinyl chloride insulated and sheathed aluminum polyester composite film wrapped shielding frequency conversion power cable.

BPYJVP cross-linked polyethylene insulated polyvinyl chloride sheathed copper wire braided shielded frequency conversion power cable.

BPYJVP2 Cross-linked polyethylene insulated polyvinyl chloride sheathed copper tape wrapped shielding frequency conversion power cable.

BPYJVPP2 Crosslinked polyethylene insulated polyvinyl chloride sheathed copper wire braided copper tape wrapped shielding frequency conversion power cable.

BPYJVP3 Crosslinked polyethylene insulated polyvinyl chloride sheathed aluminum polyester composite film wrapped shielding frequency conversion power cable.

V. Model Description:

Item proxy number stated

Series code BP frequency conversion cable

Insulation code YJ crosslinked polyethylene insulation

Sheath code V polyvinyl chloride sheath

Sheath code E Halogen-free low smoke polyolefin sheath

Shielding code TP2 concentric conductor + copper strip shielding structure

Shield code P12 copper strip shield + copper wire braided double shield

Shielding code PX12 copper strip shielding + tinned copper wire braided double shielding

Armor code 22 steel tape armor

Flame retardant code ZR flame retardant type