I. Instructions for the use of control cable products

PVC J-edge control cable is produced according to GB/T9330.2-2008 standard. It is suitable for control, signal, protection and measurement system with rated AC voltage of 450/750V and below. It is mainly used in engineering construction, iron and steel, petroleum, chemical industry, power plant and other industries.

The rated power frequency voltage of the cable U0/U is 450/750V. The maximum allowable operating temperature of the cable conductor is 70 ° C. The ambient temperature should not be lower than 0 ° C. If the ambient temperature is lower than 0 ° C, preheat the cable.

Recommended allowable bending radius of cable: unarmored cable, should not be less than 6 times of the cable diameter;

Armored or copper tape shielded cables shall not be less than 12 times of cable diameter;

The shielded flexible cable should not be less than 6 times of the cable diameter.

Ii. Type and name of control cable

Type number name

KVV rated voltage 450/750V copper conductor PVC J-edge and sheathed control cable

KVVP rated voltage 450/750V copper core conductor PVC J-edge and sheathed copper braided shielding control cable

KVVP2 rated voltage 450/750V copper core conductor PVC J-edge and sheathed copper tape shielded control cable

KVVP3 rated voltage 450/750V copper core conductor PVC J-edge and sheathed aluminum plastic tape shielded control cable

KVV22 Copper core conductor PVC J-edge and sheathed steel tape armoured control cable for rated voltage 450/750V

KVVR rated voltage 450/750V copper core conductor PVC J-edge and sheathed control flexible cable

KVVRP rated voltage 450/750V copper core conductor PVC J-edge and sheathed copper braided shielding control flexible cable

KVVRP3 rated voltage 450/750V copper core conductor PVC J-edge and sheathed aluminum-plastic composite tape wrapped shielding control flexible cable

KVVP2-22 Rated voltage 450/750V copper core conductor PVC J-edge and sheathed copper tape screen steel tape armored control cable